Hot Wire Foam Cutter Tool

Key Features

• Competitive Edge: 18W, four quick-change tips, and 5-second hot wire heat-up. Cuts EPS, EPE, EVA, EPP, XPS, and Sponge without a temperature dial. Cuts, shapes, and engraves - four tips, one tool.
• Package Includes: WFC0010 Cutter, 2x Hot Wire Tips (U-Type & F-Type, Typ 2000, 0.25mm/180mm), 4 inch (10cm) Straight Tip, 2 inch (5cm) Straight Tip, 5x Replacement Wire, 20W Adapter, Scraper, Support Frame, Table Fixation, Marker, Manual, Warranty Card.
• Versatile Use: Cuts EPS, EPE, EPP, XPS, Sponge, and foam board. EVA compatible via hot wire tips only - not straight tips.
• Performance Specs: Hot wire tips reach 320°C (608°F) in 5 seconds. 4 inch (10cm) tip reaches 400°C (752°F) in 30 seconds. 2 inch (5cm) engraving tip reaches 450°C (842°F) in 30 seconds.
• Safety & Usage: Overheating protection and cool-touch handle. Max 40 min - allow cooling between uses. Use in a ventilated area. Wear safety goggles. Backed by a 2-month warranty.
• Tip Guide: The U-Type and F-Type hot wire tips cut straight lines and smooth curves through EPS, EPE, and XPS blocks, reaching 320°C (608°F) in 5 seconds. Use these for large-block sculpting and freehand shaping. The 4 inch (10cm) straight tip (304 SS, 2mm body, 0.3mm point) handles detailed pattern cuts and precise trimming at 400°C (752°F). The 2 inch (5cm) straight tip (304 SS, 2mm body, 0.3mm point) engraves surface patterns and lettering at 450°C (842°F) - the highest temperature in the WINONS pen-style range. Note: straight tips are not compatible with EVA.
• Make It Real: Cut clean foam board panels for display signs and retail fixtures. Shape large EPS or XPS blocks for cosplay armour, stage props, and architectural presentation models. Use the engraving tip to score surface detail, lettering, or texture patterns into foam panels. The WFC0010 handles every stage from rough block shaping to fine surface work without switching tools.
• Replacement Tips and Wire: When tips wear down, replace with the WFC0010L tip set (4 inch/2 inch straight tips) or WFC0010W replacement wire (5x German Typ 2000, 0.25mm/180mm). Both are available in the WINONS store and are compatible with the WFC0010 handle only.
• Who It's For: The WFC0010 suits home makers, craft hobbyists, cosplay builders, model makers, and classroom projects requiring precise foam cutting and surface engraving. The four-tip kit covers every stage from rough shaping to fine detail work without a separate tool.
• Our Guarantee: WINONS has been building foam cutting tools since 2016. The WFC0010 is covered by a 2-month manufacturer warranty and full after-sales support. Contact WINONS directly with any question - we respond within 24 hours.

Specifications